3D surround - a happy customer

**Narcotics** · 06-05-12, 10:36

Originally Posted by Wozza365

yeh its good, it just reduces wear if the temps are a bit lower, i get no more than 60c on my 570 at max settings on bf3 at just 80% fan speed, 60c is my target to stay below

GTX 680 Jetstream
60% max fan speed
Iddle GPU Temperature 22.0'c - 42% Fan Speed - 1110 RPM No heating in my room.
Played Crysis 2 & Dirt 3 for 50minutes
high average is 55.0'c - 60% Fan Speed - 1800 RPM it did hit 60.0'c for about 4 seconds

**tom_gr7** · 06-05-12, 10:48

sounds good dude,

what software is that?

**Narcotics** · 06-05-12, 11:34

Originally Posted by tom_gr7

sounds good dude,

what software is that?

EVGA Precision X http://www.evga.com/precision/

**Wozza365** · 06-05-12, 12:06

they even offer an android version which i guess is for overclocking

**keynes** · 31-05-12, 16:36

New fans installed:
img02321z.jpg

**Wolvo7** · 31-05-12, 17:14

Originally Posted by rubensolo

New fans installed:
img02321z.jpg

Just noticed you have the Haf-X been trying to find someone with one ^^. How would you rate this case is it worth the additional ££ over a more traditional one?

Also I see that you have the NZXT fan controller, as it comes with 5 fitted fans does that mean that the case comes with the standard fans ie front LED fan, one on the right panel, one at the back and one on top plus an additional one on top?

Lastly do you know if PCS can fit cathode tubes on demand? I know you fitted yours yourself but I'm considering just adding some to the build if PCS have some just to avoid the hassle

Thanks

**keynes** · 31-05-12, 17:19

Originally Posted by Wolvo7

Just noticed you have the Haf-X been trying to find someone with one ^^. How would you rate this case is it worth the additional ££ over a more traditional one?

Also I see that you have the NZXT fan controller, as it comes with 5 fitted fans does that mean that the case comes with the standard fans ie front LED fan, one on the right panel, one at the back and one on top plus an additional one on top?

Lastly do you know if PCS can fit cathode tubes on demand? I know you fitted yours yourself but I'm considering just adding some to the build if PCS have some just to avoid the hassle

Thanks

I love the Haf-X, the case comes with the front fan, one top fan and 1 fan in the side panel. I sent the additional fans to PCS and they fitted those for me and connected them to the fan controller. Not sure if they will do the cathode lights (they don't sell them) but they were pretty straightforward to set up.

**Wolvo7** · 31-05-12, 17:27

Cool

About the fans why did you decide to send some? If they add some more fans with the NZXT controller to up the total to 5 that would mean that they could've added 2 more fans for the same price. Were the fans you sent of better quality?

I'll ask them about the lights closer to the date, thanks

**keynes** · 31-05-12, 17:29

Originally Posted by Wolvo7

Cool

About the fans why did you decide to send some? If they add some more fans with the NZXT controller to up the total to 5 that would mean that they could've added 2 more fans for the same price. Were the fans you sent of better quality?

I'll ask them about the lights closer to the date, thanks

The case comes only with 1 top fan, I added one more, the side panel fan was clear so I decided to send a red-led megaflow instead (that I just replaced with a blue spectre pro 200mm).

**Wolvo7** · 31-05-12, 17:33

Ah right makes sense I just checked again and the additional fans provided with the NZXT are 120mm, so they wouldn't go on top since you need a 200mm. Very nice PC btw

Thread: 3D surround - a happy customer

Thread Tools

Search Thread

Display

Posting Permissions