Etching Tempered Glass

ShadowDragon25

Active member
I have a Coolermaster Mastercase H500M and wondering about etching the tempered glass with a custom design. Does anyone know anywhere that does this or any tips on this?
 

Linda

Active member
I do a lot of crafting hobby things and a suggestion that is not to destructive is
1 - If you want a custom design buy some sort of cardboard or plastic big enough for your needs. Or just buy stencils.
2- Then either draw for trace out a design that you want.
3- With sharp Stanley blade or similar sharp tool cut out your template.
4- Use low tack masking tape to position and tape to the PC Case.
5- From DIY or hobby shop purchase a aerosol can of glass etching spray paint.

This way if the desired effect is not what you expected at least you can gently remove it with soap (fairy liquid) and water, and not destroy your case.
 

Tony1044

Prolific Poster
I do a lot of crafting hobby things and a suggestion that is not to destructive is
1 - If you want a custom design buy some sort of cardboard or plastic big enough for your needs. Or just buy stencils.
2- Then either draw for trace out a design that you want.
3- With sharp Stanley blade or similar sharp tool cut out your template.
4- Use low tack masking tape to position and tape to the PC Case.
5- From DIY or hobby shop purchase a aerosol can of glass etching spray paint.

This way if the desired effect is not what you expected at least you can gently remove it with soap (fairy liquid) and water, and not destroy your case.

That is really good advice!
 
Top