Intel Wireless Bluetooth error

[OnlyRussellHD]

Not sure if this is a known problem or how to fix it but I am running into an issue with The WiFi 6 AX200, When viewing it in device management it shows "Code 10 STATUS_DEVICE_POWER_FAILURE" I have tried opening back to connectivity, it came un-stuck during transit but connectivity didn't seem like an issue and I saw no obvious damage, I have checked I have the newest drivers and re-installed them to make sure I wasn't running into issues there. On Intel support assistant it's even recognizing an error but I don't have any solutions.

Will provide images below.

 

[ubuysa]

Both the Intel Driver & Support Assistant and Device Manager are telling you the WIFi device is not functioning properly. That's what the Error status in the Driver & Support Assistant and the Code 10 STATUS_DEVICE_POWER_FAILURE in Device Manager are trying to say. Since the latest device is installed this is most likely a fault on the WiFi card itself.

If this is a laptop then check that the card is properly seated and both antennae cables are pressed fully home.

If this is a desktop then pop the wireless card out and reseat it fully. Ensure both antennae are connected at the back.

If it still shows errors after that then contact PCS, point them at this thread, and ask whether they will swap the wireless card for you - that will save the (long) RMA wait......