Hi guys,
I need help. I've been running this system (below is the breakdown) for few years now and didn't had any bigger issues with it so far.
However recently when booting I got a message that overclocking has failed. I haven’t touched any of the settings so not sure what happened. I'm a bit of a noob when it comes to things like that so bear with me.
If I go and say set a gamers preset in bios it will fail to boot. I then have to unplug it from the power and when I boot in the startup screen in will have 1200 mhz next to 'speed' and when the system is loaded I can definitely feel the lack of power.
Can somebody give me any advice on how to go about the situation? Is there any other settings that I can set in the bios that would let me use the pc in its full power again?
This is the system:
Case COOLERMASTER HAF 922 MID TOWER GAMING CASE
Overclocked CPU Overclocked Intel® Six Core i7-3930K (3.2GHz @ max 4.6GHz)
OC Settings Show/Hide
Motherboard ASUS® RAMPAGE IV EXTREME: INTEL X79, SOCKET 2011, R.O.G
Memory (RAM) 32GB KINGSTON HYPERX GENESIS QUAD-DDR3 1600MHz X.M.P(8 x 4GB KIT)
Graphics Card 2GB NVIDIA GEFORCE GTX 560 Ti - 2 DVI,HDMI,VGA - 3D Vision Ready
1st Hard Disk 2TB 3.5" SATA-III 6GB/s HDD 7200RPM 64MB CACHE
Power Supply CORSAIR 650W ENTHUSIAST SERIES™ TX650 V2-80 PLUS® BRONZE
Processor Cooling INTEL CERTIFIED LIQUID CPU COOLER FOR SOCKET LG2011
Thermal Paste ARCTIC MX-4 EXTREME THERMAL CONDUCTIVITY COMPOUND
Fan Controller NONE
Thanks,
Max
I need help. I've been running this system (below is the breakdown) for few years now and didn't had any bigger issues with it so far.
However recently when booting I got a message that overclocking has failed. I haven’t touched any of the settings so not sure what happened. I'm a bit of a noob when it comes to things like that so bear with me.
If I go and say set a gamers preset in bios it will fail to boot. I then have to unplug it from the power and when I boot in the startup screen in will have 1200 mhz next to 'speed' and when the system is loaded I can definitely feel the lack of power.
Can somebody give me any advice on how to go about the situation? Is there any other settings that I can set in the bios that would let me use the pc in its full power again?
This is the system:
Case COOLERMASTER HAF 922 MID TOWER GAMING CASE
Overclocked CPU Overclocked Intel® Six Core i7-3930K (3.2GHz @ max 4.6GHz)
OC Settings Show/Hide
Motherboard ASUS® RAMPAGE IV EXTREME: INTEL X79, SOCKET 2011, R.O.G
Memory (RAM) 32GB KINGSTON HYPERX GENESIS QUAD-DDR3 1600MHz X.M.P(8 x 4GB KIT)
Graphics Card 2GB NVIDIA GEFORCE GTX 560 Ti - 2 DVI,HDMI,VGA - 3D Vision Ready
1st Hard Disk 2TB 3.5" SATA-III 6GB/s HDD 7200RPM 64MB CACHE
Power Supply CORSAIR 650W ENTHUSIAST SERIES™ TX650 V2-80 PLUS® BRONZE
Processor Cooling INTEL CERTIFIED LIQUID CPU COOLER FOR SOCKET LG2011
Thermal Paste ARCTIC MX-4 EXTREME THERMAL CONDUCTIVITY COMPOUND
Fan Controller NONE
Thanks,
Max