PC not booting up at all

V

Velaer

New member
Hi

I have just setup the PC pinned all the required connectors to it's places however when I turn on the pc nothing is working, lights, fans nothing

I have tried to check if PSU fails so I have done a circuit check and there is power coming up with 24 PIN connector but if you try to boot it up with the electric circuit it doesnt do anything, i believe either the PIN is not working or maybe I have used a wrong POWER SW connector

Please could someone review this

Kind Regards
 
V

Velaer

New member
Its a custom build
CPU - i5 9400F
Motherboard - B365 Pro4 ASRock
Graphics card - GTX 1650
PSU - CX650M Corsair
RAM - Corsair Vengeance DDR4 3000MHZ 2x8GB
 
V

Velaer

New member
Yes I did that turned off and on tried different power cable, run electric tests all fine it seems as if the pins which are connecting to the POWER SW are not working correctly
 
ubuysa

ubuysa

The BSOD Doctor
I'm afraid that since these fora belong to PC Specialist we can't offer advice on other builds. You might try a more general forum like Tom's Hardware.
 
You must log in or register to reply here.
Top