Please help me find this setting (Asus Z97-A) - Lost my OC by accident

[Recon_Six]

Hi guys,

Long story short I had my BIOS restored to default and am trying to put back my overclock.

Overclocked Intel® Core™i5-4670k Quad Core (3.40GHz @ max 4.20GHz)
ASUS® Z97-A: ATX, USB3.0, SATA 6GB/S, SLi, XFIRE

I found my OC settings (below) in my order history but there is one setting I cannot find anywhere in the BIOS and that is the System Agent Voltage. The only thing I can find that sounds remotely close is the System Agent Voltage Offset. I want to make sure I am entering exactly what the guys at PC Specialist saved in my order history, I tried running the machine without the System Agent Voltage adjusted, and it ran fine for about 12 hours and then bluescreened on me, so I have gone back to default settings again until I can confirm where this setting is in my BIOS. (To clarify this is what my BIOS looks like https://www.youtube.com/watch?v=50qziHraZBs)

AI Overclock Tuner: XMP
BLCK Freq:
Turbo Ratio: By All Cores
By All Cores: 42
Internal PLL OverVoltage:
Mem Freq: XMP Default
EPU Power Saving: Disabled
Load-Line Calibration:
VRM Freq:
Phase Control:
Duty Contorl:
CPU Manual Voltage: 1.25V
DRAM Voltage: XMP Default
CPU Spread Spectrum: Disabled
CPU Ratio:
CPU C States: Disabled
EIST: Disabled
SVID Support: Disabled
System Agent Voltage: 0.4V

As you can tell, I am a complete novice and have never done a manual OC before.

Thank you in advance.

 

[keynes]

Try to contact PCS for the overclock settings, it might be stored in your homepage.

 

[Recon_Six]

Hi,

Thanks, I have the settings, thats what I pasted above, the problem is one of the setting says System Agent Voltage: 0.4V and I cannot find the System Agent Voltage anywhere in my BIOS, I can only see System Agent Voltage Offset.

 

[Recon_Six]

This issue is now Resolved The team at PC Specialist got back to me, as my board does not have System Agent Voltage, I needed to put that into the System Agent Voltage Offset.