So i got a computer form pcspecialist about 2 months ago and since quaratine i have just been playing games on it. The reason i got it was i needed an upgrade from my old 10 year old computer. Here is my specs:
So recently I enabled SVM in the bios as i needed it to use virtualbox, but when i enable it and restart my computer becomes really slow and it will eventually cause a BSOD which says that the problem is this:
I have no clue what to do! After the BSOD i disabled SVM and everything went back to normal and no crashes since, but i needed to be able to run VM on my pc.
I have already tried DDU and reinstalling the drivers, but this has not changed anything.
Any suggestions?
| Processor (CPU) | AMD Ryzen 5 2600X Six Core CPU (3.6GHz-4.25GHz/19MB CACHE/AM4) |
| Motherboard | ASUS® PRIME B450-PLUS (DDR4, USB 3.1, 6Gb/s) - RGB Ready! |
| Memory (RAM) | 16GB Corsair VENGEANCE DDR4 2400MHz (2 x 8GB) |
| Graphics Card | 8GB AMD RADEON™ RX 5700 - HDMI, DP - DX® 121s t |
| Storage Drive | 256GB PCS 2.5" SSD, SATA 6 Gb (500MB/R, 400MB/W) Partitions: 256GB 2nd Storage Drive1TB SEAGATE BARRACUDA SATA-III 3.5" HDD, 6GB/s, 7200RPM, 64MB CACHE Partitions: 1000GB |
| Power Supply | CORSAIR 650W VS SERIES™ VS-650 POWER SUPPLYPower Cable1 x 1 Metre UK Power Cable (Kettle Lead) |
| Processor Cooling | STANDARD AMD CPU COOLERThermal PasteSTANDARD THERMAL PASTE FOR SUFFICIENT COOLINGLED Lighting50cm RGB LED StripExtra Case Fans2x 120mm Black Case Fan (configured to extract from rear/roof) |
| Sound Card | ONBOARD 6 CHANNEL (5.1) HIGH DEF AUDIO (AS STANDARD) |
| Windows os | Windows 10 Home 64 Bit - inc. Single Licence Operating System |
So recently I enabled SVM in the bios as i needed it to use virtualbox, but when i enable it and restart my computer becomes really slow and it will eventually cause a BSOD which says that the problem is this:
I have no clue what to do! After the BSOD i disabled SVM and everything went back to normal and no crashes since, but i needed to be able to run VM on my pc.
I have already tried DDU and reinstalling the drivers, but this has not changed anything.
Any suggestions?
