2600k overclocking

W

WhiteKnight

New member
hey guys i have 16gig of ram 1600mhz with asus sabortooth motherboard my v-core shows up aroun 1.36 - 1.37 and when gaming the core temp is around 65 and under

im currently running at 4.6 with this setting

AI Overclock Tuner: manual
BLCK Freq: 100.00
Turbo Ratio: enabled (all cores)
By All Cores: 46
Internal PLL OverVoltage: enabled
Mem Freq: 1600MHz
EPU Power Saving: disabled
Load-Line Calibration: regular
VRM Freq: auto
Phase Control: extreme
Duty Contorl: extreme
CPU Current Capability: 110%
CPU OverVoltage: manual mode
CPU Manual Voltage: 1.40V
DRAM Voltage: 1.650V
VCCSA Voltage: 1.1250V
VCCIO Voltage: 1.150V
CPU PLL Voltage: 1.81250V
PCH Voltage: auto
CPU Spread Spectrum: disabled
CPU Ratio: auto
Intel Adaptive Thermal Monitor: enabled
Intel Virtualization: disabled
Intel SpeedStep: enabled
Turbo Mode: enabled
CPU C1E: disabled

is there any way i can get 4.8 maybe 5ghz if im lucky lol
 
L

LFFPicard

Godlike
Was the machine overclocked for you by PCS?

If not be careful as if your CPU dies as a result of the overclocking it is not covered under the warranty.

On topic though I do not know overclocking settings, Sorry.
 
Nemesis

Nemesis

Moderator
Moderator
The spec only says : Overclocked Intel® Core™i7-2600k Quad Core (3.40GHz @ max 4.80GHz)
the stable max they can achieve with your setup can vary alot depending on the cooler, ram, cpu, motherboard and luck in the end of the day
 
S

silkysean

Bronze Level Poster
4.8Ghz Settings - 1.000v idle/ 1.344 - 1.368v Max Load

AI Overclock Tuner: Manual
BLCK Freq: 100.00
Turbo Ratio: Enabled (All Cores)
By All Cores: 48
Internal PLL OverVoltage: Enabled
Mem Freq: (AS PER YOUR RAM)
EPU Power Saving: Disabled

Load-Line Calibration: High
VRM Freq: Manual Set to 350
Phase Control: Extreme
Duty Contorl: Extreme
CPU Current Capability: 100%
CPU OverVoltage: Offset Mode
CPU Offset: + 0.060 (This may be too low for some people, so either up this to 0.090 or add 0.030 to the Additional Turbo Voltage setting)
DRAM Voltage: (AS PER YOUR RAM)
VCCSA Voltage: Auto
VCCIO Voltage: Auto
CPU PLL Voltage: Auto
PCH Voltage: Auto
CPU Spread Spectrum: Disabled
CPU Ratio: Auto
Intel Adaptive Thermal Monitor: Enabled
Intel Virtualization: Disabled
Intel SpeedStep: Enabled
Turbo Mode: Enabled
CPU C1E, C3, C6: Enabled
 
Sie

Sie

Gold Level Poster
out of curiosity, you buy a pre OC'd comp right then futher OC it...it dies..is there a way to tell someone tweaked the OC'd settings to pump more juice out of it ? like a back log or something? because if the OP's cpu did die due to his "custom" oc then there wouldnt be a way to tell due to the fact that he ordered a pre OC'd machine...am i right in believing this is the case?
 
Nemesis

Nemesis

Moderator
Moderator
Someone correct me if im wrong but im pretty sure all the settings are stored on the system
PCS will have their own record of the settings they applied
so when they receive the system for an RMA or whatever,
if the two sets of settings dont match up then they will know......
 
Sie

Sie

Gold Level Poster
Ah right, sounds like a good idea im sure that is probably what they do..check if there are "new" profiles since they dispatched the machine
 
You must log in or register to reply here.
Top