ASUS Rog Strix Z390-F no display after BIOS tinkering

Status
Not open for further replies.
S

StuBol1977

New member
Hello,

I'm building a PC for the 1st time in around 15 years, and it seems that motherboards have become very particular since then. After failing to get Windows 10 to build, (could boot and start install, but failed shortly after), I started working through various BIOS settings. At some stage I lost my display. I disconnected the HDD & reset the CMOS via the jumpers. It's obviously done something as on boot it went through the start, stop, restart motions that I'd expect to see. However, no display is output at any point.

Any advice on how I can get my display back? (CPU is an i5-9400F, in case that's relevant).

Thanks,
Stuart
 
ubuysa

ubuysa

The BSOD Doctor
Since these fora belong to PC Specialist, who sell custom built gaming PCs and laptops, we can't offer advice on other builds I'm afraid. You might get help on a more general forum like Tom's Hardware.
 
S

StuBol1977

New member
ubuysa said:
Since these fora belong to PC Specialist, who sell custom built gaming PCs and laptops, we can't offer advice on other builds I'm afraid. You might get help on a more general forum like Tom's Hardware.
Click to expand...
Ha! Well, that is a very good point. Thanks :)
 
Status
Not open for further replies.
Top