I have this enabled already and the option to erase if factory reset. Its the first thing I checked.
Unfortunately Window 11 update Tool does not accept fTPM as security (it may be a bug) - In the meantime I have managed to purchase a TPM m rev 2.0 module, the correct variant for my board for...
This is my build which is just over a year old.
Guess what Its incompatable with WINDOWS 11 - because it has no TPM. Its seems that I have to purchase a TPM module which are currently selling on ebay for £150. It an option on this board.
Does anyone know to purchase one relatively cheaper...
Processor (CPU)
AMD Ryzen 9 3950X 16 Core CPU (3.5GHz-4.7GHz/73MB CACHE/AM4)
Motherboard
ASUS® CROSSHAIR VIII HERO (DDR4, PCIe 4.0, CrossFireX/SLI) - RGB Ready!
Motherboard does not have graphic output except the bespoke card on the PCI slot.
Yesterday evening my PC reset itself and when the post screen came on it had green lines across the whole monitor - windows booted and the green lines were more defined across the monitor.
I log onto windows and checked device manager I noticed a error code 43 and the resource tab says it was...
Not impressed with technical support - took 3 messages to confirm that I have a 19 connection and then they advised not to install the extension cable.
I paid £4000 for this machine and I am not impressed with the minimal cable management. I have ordered the cable and will be installing to...
http://www.watercoolinguk.co.uk/p/Akasa-USB-30-19-pin-15cm-extension-low-profile-connector_72136.html?gclid=Cj0KCQjws_r0BRCwARIsAMxfDRjvw-UPqEoMlaaJurv9zTzgEpWbJHMV3xtcrW43g3GN_bt2ncfdI68aAlM-EALw_wcB
Found this - or do I need a 20 pin connector?
Regards
Mac
Here are pictures of the cable problem I have.
First shows the cable pushing on the graphic card.
Second show the same and also that the header plug is applying pressure to the connector.
Third show how the header plug is not fully inserted into the connector because of the folded cables...
My PC had a hissy fit this morning - arrived yesterday and worked faultlessly all day yesterday. Started ok this morning, booted destiny 2 and after 5 minutes display went dead and the rtx2080Ti light and fans went dead and case fans start running extreme. Had to power down via power switch...
PC arrived this morning and setup with installation of programs games went smooth and fast.
Only downside is they forgot to place the ordered fan at the back of the case. Its not a problem just have to locate a spare fan power socket and feed the Controller cable trough the back to the Corsair...
I checked the specs and the 2 X 200mm fans on the front of the H500M does push more air than the 3 X 120mm fans on the 500D SE - whilst doing the research I found that the 4 USB on the front panel needed 2 headers or a splitter and that he RGB fans on the front are connected to the reset button...
Yes I considered the 500D SE but preferred the extra flow of the two 200mm fan with the Mesh front.
Again, thanks to all and no more suggestions - it will cost me money!!!!!!! ;)
Thank you for your suggestion - its cost me a further £156 pounds;)
Drives are as now:
1st Storage Drive
4TB SEAGATE IRONWOLF PRO 3.5", 7200 RPM 128MB CACHE
1st M.2 SSD Drive
1TB SEAGATE FIRECUDA 520 GEN 4 PCIe NVMe (up to 5000MB/R, 4400MB/W)
2nd M.2 SSD Drive
2TB SEAGATE FIRECUDA 520 GEN 4...
Just confirming that I placed my order and paid by debit card - also added 3 years protection insurance for peace of mind.
To Spydertracks, many thanks for your assistance and hopefully my review and pictures will be on the forum in four to five week.
Regards Mac
Thanks for the reply - so a standard 3950X build with AIO cooler with no overclock and aircooled graphic card. So no need for Lian Li case then - something like a coolermaster 570X should do.
Total budget is £5000.
Regards