Hi guys,
Long story short I had my BIOS restored to default and am trying to put back my overclock.
Overclocked Intel® Core™i5-4670k Quad Core (3.40GHz @ max 4.20GHz)
ASUS® Z97-A: ATX, USB3.0, SATA 6GB/S, SLi, XFIRE
I found my OC settings (below) in my order history but there is one setting I cannot find anywhere in the BIOS and that is the System Agent Voltage. The only thing I can find that sounds remotely close is the System Agent Voltage Offset. I want to make sure I am entering exactly what the guys at PC Specialist saved in my order history, I tried running the machine without the System Agent Voltage adjusted, and it ran fine for about 12 hours and then bluescreened on me, so I have gone back to default settings again until I can confirm where this setting is in my BIOS. (To clarify this is what my BIOS looks like https://www.youtube.com/watch?v=50qziHraZBs)
AI Overclock Tuner: XMP
BLCK Freq:
Turbo Ratio: By All Cores
By All Cores: 42
Internal PLL OverVoltage:
Mem Freq: XMP Default
EPU Power Saving: Disabled
Load-Line Calibration:
VRM Freq:
Phase Control:
Duty Contorl:
CPU Manual Voltage: 1.25V
DRAM Voltage: XMP Default
CPU Spread Spectrum: Disabled
CPU Ratio:
CPU C States: Disabled
EIST: Disabled
SVID Support: Disabled
System Agent Voltage: 0.4V
As you can tell, I am a complete novice and have never done a manual OC before.
Thank you in advance.
Long story short I had my BIOS restored to default and am trying to put back my overclock.
Overclocked Intel® Core™i5-4670k Quad Core (3.40GHz @ max 4.20GHz)
ASUS® Z97-A: ATX, USB3.0, SATA 6GB/S, SLi, XFIRE
I found my OC settings (below) in my order history but there is one setting I cannot find anywhere in the BIOS and that is the System Agent Voltage. The only thing I can find that sounds remotely close is the System Agent Voltage Offset. I want to make sure I am entering exactly what the guys at PC Specialist saved in my order history, I tried running the machine without the System Agent Voltage adjusted, and it ran fine for about 12 hours and then bluescreened on me, so I have gone back to default settings again until I can confirm where this setting is in my BIOS. (To clarify this is what my BIOS looks like https://www.youtube.com/watch?v=50qziHraZBs)
AI Overclock Tuner: XMP
BLCK Freq:
Turbo Ratio: By All Cores
By All Cores: 42
Internal PLL OverVoltage:
Mem Freq: XMP Default
EPU Power Saving: Disabled
Load-Line Calibration:
VRM Freq:
Phase Control:
Duty Contorl:
CPU Manual Voltage: 1.25V
DRAM Voltage: XMP Default
CPU Spread Spectrum: Disabled
CPU Ratio:
CPU C States: Disabled
EIST: Disabled
SVID Support: Disabled
System Agent Voltage: 0.4V
As you can tell, I am a complete novice and have never done a manual OC before.
Thank you in advance.