SpyderTracks
We love you Ukraine
No, was just asking.I haven't downloaded an AV yet, just have Defender on. I'm using Malwarebytes on my old, go for an install & scan on that before proceeding?
No, was just asking.I haven't downloaded an AV yet, just have Defender on. I'm using Malwarebytes on my old, go for an install & scan on that before proceeding?
Make sure that you didn't disturb any connections when you did the RAM, and just give another gentle push down on the RAM just to make sure it has gone back in properlyShe's breaking my heart, she's not booting up since reseating the RAM now.
I only reseated the RAM, I didn't attempt to reseat the GPU yet.
I'm not getting the initial beep on startup like I used to but it is powering up. Opening the side while it's turning on I can see everything lit up, all fans are spinning & my peripherals are powered on when connected too. Nothing to monitors though.
Thanks Martin, I reseated them again and we're booting up now. I thought since there was only 1 unlock clip that I was looking for 1 click when putting them back. Just pushed both sides down simultaneously & got doubleclicks. Got a scare thereMake sure that you didn't disturb any connections when you did the RAM, and just give another gentle push down on the RAM just to make sure it has gone back in properly
Been there done it with brand new memory i had boughtThanks Martin, I reseated them again and we're booting up now. I thought since there was only 1 unlock clip that I was looking for 1 click when putting them back. Just pushed both sides down simultaneously & got doubleclicks. Got a scare there
DHCP service depends on the AFD service which failed to start because of the following error:
A device attached to the system is not functioning.
The NSI service depends on the NSIPROXY service which failed to start because of the following error:
A device attached to the system is not functioning.
DNSCACHE service depends on the AFD service which failed to start because of the following error:
A device attached to the system is not functioning.
WCMSVC service depends on the NSI service which failed to start because of the following error:
The dependency group or service failed to start.
WLANSVC service depends on the WCMSVC service which failed to start because of the following error:
The dependency group or service failed to start.
LANMANWORKSTATION service depends on the NSI service which failed to start because of the following error:
The dependency group or service failed to start.
WINHTTPAUTOPROXYSVC service depends on the DHCP service which failed to start because of the following error:
The dependency group or service failed to start.
NLASVC service depends on the DHCP service which failed to start because of the following error:
The dependency group or service failed to start.
IPHLPSVC service depends on the WINHTTPAUTOPROXYSVC service which failed to start because of the following error:
The dependency group or service failed to start.
Hmmm. After a clean install of Windows it's almost certainly hardware related.
In the System log I see a failed update for Windows Defender again (KB4052623) which is a puzzlement.
I also see all these network related services failing to start...
Code:DHCP service depends on the AFD service which failed to start because of the following error: A device attached to the system is not functioning.
Code:The NSI service depends on the NSIPROXY service which failed to start because of the following error: A device attached to the system is not functioning.
Code:DNSCACHE service depends on the AFD service which failed to start because of the following error: A device attached to the system is not functioning.
Code:WCMSVC service depends on the NSI service which failed to start because of the following error: The dependency group or service failed to start.
Code:WLANSVC service depends on the WCMSVC service which failed to start because of the following error: The dependency group or service failed to start.
Code:LANMANWORKSTATION service depends on the NSI service which failed to start because of the following error: The dependency group or service failed to start.
Code:WINHTTPAUTOPROXYSVC service depends on the DHCP service which failed to start because of the following error: The dependency group or service failed to start.
Code:NLASVC service depends on the DHCP service which failed to start because of the following error: The dependency group or service failed to start.
Code:IPHLPSVC service depends on the WINHTTPAUTOPROXYSVC service which failed to start because of the following error: The dependency group or service failed to start.
...you see all the dependencies? The root seems to be 'a device attached to the system is not functioning' - what device might that be I wonder? The AFD service is the Ancillary Function Driver for WinSock - a key network component.
There then follows a bunch of DCOM failures trying to start other services - almost certainly because of the above failures. This is exactly what I saw earlier.
In the Application log there are failures for Bouyancy.exe, Raedonsoftware.exe, and RaedonSoftware.exe as we saw in your earlier logs. My guess is these fail because required networking services are not started (as above).
My guess (and that's all it is) is that some device is preventing the AFD service from starting and that's causing a cascade failure. I would remove the AX200 WiFi card completely and connect to the router via Ethernet (even temporarily). If that doesn't help then I think you need an RMA for a motherboard issue of some sort.
That may be the problem then?Thanks for taking the time to investigate & provide your analysis again. I'm already connected through ethernet & haven't used or even attempted to use WIFI nor do I need it.
I checked the WIFI status & it's turned on but not showing any networks.
It will be the card with the two antennae screwed into the back. Probably the smallest one in the case.Would you happen to know the location of the WIFI card so I could try removing it?
Thank you again, I checked the antennae at the back and was able to tighten them & was then able to pick up wifi networks when wifi was turned on. Before removing the wifi card I've reinstalled windows once more & would ask could you check if you still believe the wifi card to be the culprit?That may be the problem then?
It will be the card with the two antennae screwed into the back. Probably the smallest one in the case.
Same problems in the System log. Remove the WiFi card completely, I suspect it may be faulty.Thank you again, I checked the antennae at the back and was able to tighten them & was then able to pick up wifi networks when wifi was turned on. Before removing the wifi card I've reinstalled windows once more & would ask could you check if you still believe the wifi card to be the culprit?
I followed the same steps as above only this time disabling wifi/hotspots as soon as windows loaded as they were turned on by default.
Apps - https://1drv.ms/u/s!Ah8rdL7C4jfPg2KKTqrzthpQ1GBw?e=fZeGbF
Sys - https://1drv.ms/u/s!Ah8rdL7C4jfPg2NIxO0owKFZ4dvI?e=HOQrSV
Just undo the screw that holds it in and gently ease it out of its socketIt looks to be on the bottom of this but not easily accessible. The thin black wire is coming from the antenna connection. What would be the best way of getting at it? I believe I have to screw it out after disconnecting the wires.
Thanks, that was a lot easier than it lookedJust undo the screw that holds it in and gently ease it out of its socket
But has it helped......?Thanks, that was a lot easier than it looked
Will let you know in a few mins. I went back to the start to reinstall again just to make sure there was nothing left over. Just setting up now.But has it helped......?